Automatic continuous vacuum blister features

Features:

1. Control system: artificial intelligence, the system uses Siemens CPU224 host and Siemens EM222 module, the human-machine interface uses Delta 10.4 inch color touch screen, professional operation screen, corresponding to the ordinary operation mode, solves the upgrade control problem. The powerful memory space is equipped with automatic operation, manual operation, function setting, mechanical animation, fault display, equipment documentation, safety guidance and other interfaces. The whole system is safe and stable.

2. Loading area: The feeding is carried out by motor lifting, the weight can be up to 200 kg, the feeding piece is driven by rubber roller, and two large material rods are used for replacing the sheet.

3. Electric heating area: electric furnace is made of stainless steel, Taiwan heating tile, Japanese high temperature wire, high frequency porcelain joint, 60 heating tiles on the furnace, 42 heating tiles under the furnace, maximum power 40.8KW, Korean DPC digital proportional regulator, one Control one to adjust the temperature, and a temperature sensor to display the temperature of the electric furnace to facilitate data management. The electric furnace cylinder drive, power outage or overhaul the electric furnace exits the machine, which is safe and convenient.

4. Molding zone: the molding length is not limited within 1220mm, the forming width is 470~720mm, the die plate is a total of 5 aluminum alloy water transport type, and it is independently disassembled. The quick vacuum tube and water pipe joint are designed to facilitate the die change. The mold plate is every 50mm. Width one specification, forming height up to 200 mm, sheet width 510~760mm, bottom mold cylinder? 150×350 mm, electric adjustable height, mold stroke up to 320mm, and equipped with vibration demoulding, multiple release blow Release mold release delay function. The upper mold cylinder is 125×450 mm, which can be electrically adjusted. It is equipped with secondary upper die independent and upper pressure release isolation function. The lower brake and middle brake are designed with quick push-pull type.

5. Chain drive: The rail cover is made of imported 718 steel by special precision machining. The middle and lower plates are precision machined from domestic high quality 45# steel. The docking precision is high, the friction coefficient is low, the service life is long, and the pull tab is used. The frequency conversion control technology, combined with the encoder, inputs the required length, and the pull tab is fast and accurate.

6. Cooling system: equipped with 10 Japanese Meiji A-100 water jet heads, 1 Japanese water chiller, 1 model water, equipped with 2 powerful fans, and the air inlet of the fan is designed for the air duct to avoid suction. Loop hot air.

7. Receiving area: The receiving box is movable design, hand-gear transmission, pneumatic tablet release, precision screw drive slicing.

8. Vacuum system: German Ricci or Puxu vacuum pump, power 4kw, pumping speed 150-160m3 per hour, vacuum cylinder 0.25m3.

9. All functions: secondary vacuum function, vacuum delay function, upper mold buffer function, upper mold electric adjustment function, lower mold electric adjustment function, multiple back blowing function, multiple demoulding function, shift metering function, secondary Upper mold function, upper mold isolation function, delayed water spray function, delayed air blowing function, air blower isolation function, secondary independent upper mold function, power-off hot furnace automatic exit function, middle and lower gate push-pull adjustment function, motor loading setting function, bottom Wind delay function.

10. Other specifications Air consumption: 6.5kg/cm2000-3000l/h
Power supply: 380V50HZ/220V60HZ /3?
Production speed: 100~300 modules/hour Machine power consumption: about 25kw/hour Mechanical size: L7800×W1650×H2560mm
Mechanical weight: about 4800kg

Multi-Purpose Wipes have a wide range of uses and there is a wipe available for any type of clean-up. The multi-purpose wipes are available wet or dry and wet wipes are packed in sealed containers to ensure that they are received ready to use. Some of the wipes can be used repeated times and are washable. Wipes are available in 1, 2 and 3 ply providing various thicknesses of wipe dependent on the cleaning purpose. The multi-purpose wipes can be used within personal, commercial and industrial environments.
Applications:
General cleaning
Automotive
Cleanroom
Delicate cleaning
Disinfecting
Drying
Dust removal
Electrical and engineering cleaning
ESD Safe
Food industry
Sanitising
Glass and mirror cleaning
Grease, grime oil, resins, varnish
Hands
Heavy-duty cleaning
IT equipment
Medical purposes
Mop up oil and liquids
Lens cleaning
Office equipment
Polishing
Printer head cleaning
The wipes are truly multi-purpose
Packaging:
Bags – dry wipes
Boxes – wet and dry wipes
Buckets – wet wipes
Packs – wet and dry wipes 
Rolls – Dry wipes, each sheet perforated, economical, use as much or as little as required
Sachets – wet wipes
Tubs – wet wipes 
Various colours available:
Beige, black, blue, green, grey, multi-colour, orange, red, white, yellow.
Ply:
1 Ply = 1 layer of material
1 Ply = 2 layers of material
3 Ply = 3 Layers of material
Wipes are available by size, number of wipes per pack, for repeated or single use and ply. Repeated use multi-purpose wipes can be washed and reused as required. Wet wipes are normally for single use and disposable.

Multi Purpose Wipes

Multi Purpose Wipes,Multi Purpose Wet Wipes,Alcohol Free Household Wipes,Multi Purpose Household Wipes

Zhejiang Youquan Care Products Technology Co., Ltd. , https://www.youquancare.com