The difference between voltage breakdown and electrical strength

The difference between voltage breakdown and electrical strength

The difference between voltage breakdown and electrical strength

The breakdown voltage is equal to the electrical strength of the sample compared to the thickness of the upper breakdown sample.

The electric strength test is also called the withstand voltage test. To put it simply, any electrical equipment has an insulation strength, and the insulation strength of different rated voltages is different. When a certain voltage level is exceeded, the insulation of the device will be broken down. The electrical strength test is to add a certain high voltage to the device under test (refer to the IEC standard or national standard) to see if it will cause breakdown. If it does not break down, pass, and breakdown means failure.

This test is usually done before the equipment leaves the factory, and it may be just shaking the insulation on site. In addition, the test is a destructive test that cannot be repaired once it is broken down.

The difference between voltage breakdown and electrical strength

fulfill the standard:

GB/T 1408-2006 Test method for electrical strength of insulating materials

GB/T 12656 capacitor paper power frequency voltage breakdown test method

ASTM D149 Test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at industrial power supply frequencies.

GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and withstand voltage strength test

GB/T3333 cable paper power frequency voltage breakdown test method

HG/T 3330 Insulating Paint Film Breaking Strength Measurement Method

Horizontal D Type Wind Turbine

Horizontal D type wind turbines

This D type wind turbine is big windmills, glass fiber blades with PMG generator, very high efficiency, suitable for industry or commercial project. We also provide pole or tower with wind turbine, and controller, Inverter, etc, ONE-STOP shopping. The blade length for this SD series wind generator is 3.2m ~ 22m, power range from 10KW ~ 600KW, with very high efficiency, around 70% ~ 90%. However, this type windmill is big and noisy, need to be installed away from residence. And it needs professional workers to install and debug it, also need professional after-sale service.

Horizontal Wind Turbine, Wind mill, Wind generators

Wuxi Smaraad New Energy Technology Co., Ltd. , https://www.smaraadenergy.com