Several important precautions for the drop machine

Droppers are designed to test the damage of a product's packaging due to a fall, and to evaluate the impact strength of a transport handling process. Double-column guide, height drop can be set, stable and reliable, can achieve edge, surface, angle fall, Kunshan Haida Instrument HD-520BS meet GB/T4857.5-92, ISO2248-1972E.

Several important precautions for the drop machine:

The drop machine is recommended to place the first floor, because of the large size and weight of 850Kg, the general elevator can not be moved, inconvenient to move; should pay attention to safety when performing the drop test, do not close to the impact table when the item falls, so as to avoid falling and back arms Shrinkage and personnel and impact test results; drop test machines should pay attention to regular maintenance, so that equipment life is longer.

● Please complete the installation environment.

Please put it at room temperature.

Places with low humidity. (no condensation below 80%)

Places with less dust and dust.

● Please install the test material as required.

Install test materials as required, otherwise unexpected failures may occur.

● Be sure to turn off the power when wiring and maintaining.

To prevent accidents and electric shock due to loss of control during operation, be sure to turn off the power before proceeding.

● Power supply

About the power supply of this drop machine, please pay attention to the following matters.

※ In principle, three-phase 380V power supply is used for power distribution.

※ Please consult with electrical engineering personnel or someone with similar knowledge about power supply and power supply engineering.

● Power cord

Be sure to use the power cord supplied with your device. If you notice abnormality in the power cord and power plug, please contact us. Replace or guide the replacement with the service personnel of our company.

● Fuse

In order to prevent fire, internal circuit damage, etc., do not use a fuse other than the one specified. When replacing a fuse, use a fuse of the same type and shape as the original one.

● Special Warning: Warning It should be noted that the application or condition being performed is of high risk and may result in personal injury or even death.

To prevent accidental injury or death, be sure to observe it clearly before moving and using the device.

This drop machine adopts photoelectric control, can set seven levels of drop height, and can also choose drop height freely. Falling release adopts electromagnetic control, which can make the sample fall freely at once and perform drop impact test on the edge, corner and plane of packaging container. . Drop machine classification: single-arm drop machine, arms drop machine.