As long as the two products are perfectly moisturized

As long as the two products are perfectly moisturized

Moisturizing and hydrating is an eternal skin care theme. On a cool day in autumn, have you begun to find that your skin is getting tighter and more dry? In fact, moisturizing is not a particularly difficult thing, as long as you choose the right product, the two together can make you moisturize the skin, soothe the oil, and let the moisture adhere to the skin.

Variety

Lotion: soothes keratin and helps moisture penetration

In two-step skin care, the lotion can maximize the effectiveness of the product in the future. Allows the skin with keratin to regain tenderness and increase moisture absorption.

Essence: water for deep dry skin

The essence is the core variety that concentrates on water supply in two-step skin care. High concentration of polar, rich in water, good penetration, to solve the problem of deep dry skin. It is refreshing after use and is especially suitable for summer skin.

Emulsion: Before the formal water supply, lay a good foundation for the skin

In two-step skin care, the lotion softens and exfoliates, while providing a moisturizing effect. The viscosity is not high, but the moisture retention is good. After smoothing the keratin, the surface of the skin is wrapped with water.

Cream: build a moisturizing film on the skin surface to protect the skin

Applying in the final stage of two-step skin care can lock the effect of the previous stage of the product. Protects skin in an external dry environment and builds a moisturizing film.

1, often horny skin: lotion + essence

day

(1) A cotton pad with a lotion to create a supple and rich skin.

(2) After applying the essence, push the feeling deep into the skin and touch it with the gesture of playing the piano to help absorb.

at night

(1) Use the palm of your hand to slap the lotion on your face and wrap your face for 10 seconds to help absorb.

(2) The essence is carefully applied to the entire face, the skin of the skin is particularly dry, and the splayed wrinkles are applied again.

2, sticky and shiny skin: essence + lotion

day

(1) The finger spreads the essence circle and slowly promotes absorption. Since it is a highly concentrated product, just apply a small amount of spread.

(2) Carefully spread the lotion with a brush to form a thin film of moisture on the surface of the skin.

at night

(1) Loose the lotion on the cotton pad and spread it to make the dry skin smooth.

(2) Under the moist state of the skin, gently pat the essence with a hand, and then apply a layer of essence again to form a thin moisture protective film.

3, rough pores and inelastic skin: lotion + cream

day

(1) Take a little lotion on the palm and press it on the face for about 15 seconds to help absorb it.

(2) Apply a cream on the cotton pad to replenish moisture deep in the skin to remove discomfort.

at night

(1) The steam towel is heated for the pores, and the cotton pad is absorbed by the emulsion and absorbed. The moisturizing ingredient of the lotion enters the absorption through the open pores.

(2) Apply a cream to the face as a whole, and cover the plastic wrap. The skin can also be perfectly moisturized.

4, the skin that evaporates too quickly: cream + lotion

day

(1) The cotton pad is wet in the lotion, wipe the face, then pour the lotion on the palm of the hand, pat the face to form a double lock water layer.

(2) Apply a thick layer on the dry cheeks and forehead with a cream and apply the rest to the T area.

at night

(1) Apply a moisturizing cotton pad to the skin and stick it on the skin like a film. After 5 minutes, remove it and gently pat it to help absorb it.

(2) The cream is applied as a film with a thick layer, and the palm is pressed to cover and help to absorb.

Coating & Laminating machine for the production of coating melting PP or PE on paper, weaving fabric, or laminating the paper, BOPP, non woven fabric, film & aluminum etc., with weaving fabric.


Twin stations substrate material unwind adopts imported ultrasonic automatic guiding system, substrate material oriented automatically and guiding control, pneumatic chucks loading material, unwind full-automatic tension control, high-speed non-stop automatic splicing continuous production; Laminating segment cooling roller adopts forced water-cooling structure, with good cooling effect; Rolling up segment adopts twin stations structure, full-automatic tension control, non-stop shaft exchange, automatic splicing. Each technology roller clutch of complete machine is controlled by pneumatic system. 


Non Woven Fabric Extrusion Coating Machine

Fabric Extrusion Coating Machine,Extrusion Pu Coating Fabric Machine

Sunny Machinery Factory , https://www.stsunnymachine.com