Manual of Human Major Histocompatibility Complex Class â…¢ (MHCâ…¢ / HLA-â…¢) ELISA Kit

Manual of Human Major Histocompatibility Complex Class â…¢ (MHCâ…¢ / HLA-â…¢) ELISA Kit

The company specializes in supplying Elisa kits, quality assurance, price concessions, and can provide free testing services, please call to consult!

This manual is for reference only, subject to the company's current provision, please call to obtain it. This kit can only be used for scientific research, not for medical diagnosis.

Human major histocompatibility complex class â…¢ (MHCâ…¢ / HLA-â…¢) quantitative detection kit (ELISA)

user's Guide

【Human major histocompatibility complex class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA kit kit name】

Human major histocompatibility complex class â…¢ (MHCâ…¢ / HLA-â…¢) quantitative detection kit (ELISA)

【Human Major Histocompatibility Complex Class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit Kit Usage】

Quantitative detection of serum, plasma and related fluids.

[Composition of Human Major Histocompatibility Complex Class â…¢ (MHCâ…¢ / HLA-â…¢) ELISA Kit]

1

Enzyme coated plate

12 holes × 8

7

Developer A liquid

6mL

2

Standard

0.3mL × 6 tubes

8

Developer B liquid

6mL

3

20 times concentrated washing liquid

25mL

9

Stop solution

6mL

4

Sample diluent

6mL

10

Instructions

1 serving

5

Special diluent

6mL

11

Sealing film

2 sheets

6

Enzyme reagent

6mL

12

sealed bag

1

[Human Major Histocompatibility Complex Class â…¢ (MHCâ…¢ / HLA-â…¢) ELISA Kit Reagents and Equipment Not Provided]

1. 37 ℃ thermostat

2. Standard specification microplate reader

3. Precision pipettes and disposable tips

4. Distilled water

5. Disposable test tubes

6. Absorbent paper

【Principle of Human Major Histocompatibility Complex Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit】

This kit uses double-antibody two-step sandwich enzyme-linked immunosorbent assay (ELISA). Add the standard and the test sample to the pre-coated human major histocompatibility complex class â…¢ (MHCâ…¢ / HLA-â…¢) monoclonal antibody transparent enzyme label coated plate. After incubation for a sufficient time, wash to remove unbound Components, add enzyme-labeled working solution, and after incubation for a sufficient time, wash to remove unbound components. Substrates A and B are added in sequence. The substrate (TMB) is converted into a blue product catalyzed by horseradish peroxidase (HRP) and turns yellow under the action of an acid. The concentration of the capacitive complex class III (MHCâ…¢ / HLA-â…¢) is positively correlated. The OD value is measured at a wavelength of 450 nm. Based on the OD value of the standard and the sample, the human major histocompatibility complex class III (MHCâ…¢ / HLA) in the sample is calculated -â…¢) Content.

【Precautions for Human Major Histocompatibility Complex Class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit】

1. The experiment is carried out in strict accordance with the instructions, and the result of the experiment must be determined by the reading of the microplate reader.

2. If the enzyme-labeled coated board is not used up after opening, it should be put into a sealed bag and added with desiccant immediately.

3. It is recommended that all standards, samples and blank controls be tested in duplicate, and the average value is taken to reduce the experimental error.

4. Keep in mind that the sample has been diluted 5 times. The calculation result is multiplied by 5 to obtain the actual concentration of the sample.

5. The quantitative range of this kit is 6.25-200ng / L. If it exceeds this range, it is calculated from the extension of the standard curve. It is not used for accurate quantitative results. ), Multiplied by the total dilution factor is the final concentration of the sample.

6. If the color is too light, the substrate incubation time can be extended properly.

7. In order to avoid cross-contamination, the tips, samples and blank controls should be replaced with a new one for each addition; the common components such as enzyme working solution, sample diluent and substrate should be cantilevered, and they should not touch the microwells. ; Do not reuse the sealing film.

8. The kits are used within the warranty period, and different batches of reagents should not be mixed.

9. Substrate B is sensitive to light and avoid prolonged exposure to light.

【Operation steps of human major histocompatibility complex class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA kit】

1. Preparation: Remove the reagent kit from the refrigerator and re-equilibrate at room temperature for 30 minutes.

2. Mixing solution: dilute the 20-fold concentrated washing solution with distilled water to the original one.

3. Add standard products and samples to be tested: take a sufficient number of enzyme-coated plates and fix them to the frame. Set up standard wells, sample wells to be tested and blank control wells, record the positions of each well in the standard wells. Add 50μL of standard product; first add 10μL of sample to be tested, and then add 40μL of sample diluent (that is, the sample is diluted 5 times); blank control well is not added.

4. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.

5. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with the washing solution, let stand for 1min, shake off the washing solution, pat dry on the absorbent paper, repeat the washing 4 times (you can also use the washing machine to press Instructions for washing the board).

6. Add enzyme-labeled working solution: add 50μL of enzyme-labeled working solution to each well, without adding blank control wells.

7. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.

8. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with washing liquid, let stand for 1min, shake off the washing liquid, pat dry on the absorbent paper, repeat the plate washing 4 times (you can also use the washing machine to press Instructions for washing the board).

9. Color development: add 50μL of developer A solution to each well, and then add 50μL of developer B solution, mix for 30s with a plate mixer (or gently shake for 30s by hand), and avoid color development at 37 ℃ for 15min .

10. Termination: Remove the enzyme labeling plate and add 50μL of stop solution to each well to stop the reaction (the color changes from blue to yellow)

11. Determination: Zero the blank holes, and within 15 minutes after termination, measure the absorbance (OD value) of each well with a wavelength of 450 nm.

12. Calculation: According to the concentration of the standard product and the corresponding OD value, calculate the linear regression equation of the standard curve, and then calculate the corresponding sample concentration on the regression equation according to the OD value of the sample. You can also use various application software to Calculation. The final concentration is the actual measured concentration times the dilution factor.

[Human major histocompatibility complex class III (MHCâ…¢ / HLA-â…¢) ELISA kit sample requirements]

1. The sample cannot contain sodium azide (NaN3) because sodium azide (NaN3) is an inhibitor of horseradish peroxidase (HRP).

2. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.

3. The sample should be fully centrifuged, without hemolysis and particles.

【Summary of operating procedures of human major histocompatibility complex class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA kit】

Prepare reagents, samples and standards

Add prepared samples and standards, and react at 37 ℃ for 30 minutes

Wash the plate 4 times, add the enzyme reagent, and react at 37 ℃ for 30 minutes

Wash the plate 4 times, add color developing solutions A and B, and develop at 37 ℃ for 15 minutes

Add stop solution

Read OD value within 15 minutes

Calculation

【The detection range of human major histocompatibility complex class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA kit】

Please inquire

【Specification of Human Major Histocompatibility Complex Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit】

96 servings / box 48 servings / box

【Storage of Human Major Histocompatibility Complex Class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit】

Store at 2-8 ℃, protected from light and moisture.

【Human Major Histocompatibility Complex Class Ⅲ (MHCⅢ / HLA-Ⅲ) ELISA Kit Validity Period】

6 months

Roller Sublimation Transfer Machine


Sublimation transfer principle

The ink will become gas under the action of high temperature , goes into the fabric fiber, and curing on the material at room temperature. This printing process is more suitable for white polyester fabric. Of course, you can also do shadow effect in the deep color  fabric.

 

Sublimation transfer process

 

Sublimation transfer feature

1. High color fastness

2. bright colors

3. The texture is obvious

4. Technology is mature

Sublimation transfer application

Sublimation transfer machine is used for sportswear, bags, non-woven fabrics, clothing and so on. In addition to the fabric, it can also be transferred to ceramics(such as cups, plates, tiles), wood, chemical fiber, glass and metal products(surface need to be coated with acrylic drying paint). Its main feature is the transfer image colorful, rich layers, the effect can be comparable with the printing. And it`s different from printing, the dye in the transfer ink is sublimated after heating, is into the molecular structure of the object, form a bright colored image after the condensate. The image will not fall off, crack and fade, so sublimation transfer products is more durable.


Our sublimation transfer machine

we provide various Roller  sublimation Heat Transfer Machine  for Garment, cloth, Fabric. suitable for ribbon, webbing , roll-cloth, cutting sheets decoration .

This kind machine was newly researched and developed in 2010, improved from the original model of "down delivery " to "the up delivery". Therefore, it is more convenient to transfer print on the clothing and pieces with more accurate location using the pneumatic pressing or hydraulic pressing for woolen blanket make the color of the products darker and brighter, which greatly speed up the transfer printing.

We mainly has two kinds sublimation machine, one is Ribbon Transfer Machine, another one is cloth transfer machine.


1.Ribbon transfer machine


2.Cloth transfer machine



Our roller sublimation transfer machine features:

  1. Lathing inner circle and circle contains grinding by precising grinding machine, ensure the thickness of the roll consistent, difference of the temperature is ±1℃. Double layers roller, more stable temperature inside the roller to ensure consistent temperature of each point, transfer effect without color difference.
  2. The stainless steel heat pipe, imported from Taiwan, is all soaked in conduction oil, heats faster and save 15% energy.
  3. Blanket is made by Dupont materials from USA, transfer effect is better and life is longer.
  4. Adopting automatic adjusting device prevents blanket to deviate while working.
  5. Pneumatic compression device can  regulate the pressure according to different materials, transfer speed is faster and color is more vivid.
  6. Inflatable shaft ensures putting cloth and paper with no excursion, rolling tightly and many, labor saving and raising overall sufficiency.
  7. Using synchronous rod and pressure balance bar make blanket breakaway, ensure pressure between blanket and roller consistent at each point, and solve the problem of blanket cooling when shut down or out of power, protect blanket and make its life longer.
  8. High hardware configurations, line cutting the main wall and shaft, error is controlled in less than 0.02 mm. Blanket will not go astray.
  9. Independent fuel tank makes adding conduction oil convenient. Having the advantage of anti-explosion and high safety.
  10. Frequency converter can freely adjust the printing speed, the transfer speed is more stable.
  11. You can set idle time according to your need to save time.



Fabric printing machine

Roller Sublimation Transfer Machine,Ribbon Transfer Machine,Cloth Heat Transfer Machine,Zipper Heat Transfer Machine

KC Printing Machine (Group) Limited , http://www.kcautopm.com