The structure and selection of climbing shoes Read more>>

The hiking shoes mentioned here refer to professional footwear that is used for activities such as walking through and mountain walking. Their common features are deep soles and good grip; uppers have a certain degree of water resistance, and some have a completely waterproof lining inside; high waists provide effective protection of the ankle during long walks. Document.write("");ad_dst = ad_dst+1; Because the positioning of each brand in product design is different, we usually choose the right product according to our actual needs.

Starting from the bottom of the shoe, the bottom of the sole is in contact with the ground. Its material and pattern determine the anti-skid performance and durability of the hiking shoe. The design of the earth and the idea of ​​car tires are very similar. The patterns applied to rocks, sand and mud are completely different. When choosing the pattern of soles, the environment that is used most of the time needs to be taken as the basis for selection. Professional brands have designed horizontal patterns on the head and tail of the soles, and they all have certain directionality. This way, when you go uphill, you will use the pattern on the head of the shoe to get more friction. The heels of the downhill can use the pattern of the shoe's tail to obtain good stability and prevent slipping. High-end hiking shoes are often double-layered structures, namely the big bottom and the midsole. The material in the middle is Kiev's elastic EVA. Its shock absorption effect is very significant and can greatly reduce joint fatigue during long-term walking.

Then say the upper, according to the material and stitching situation, the upper can be divided into three kinds of skin, skin and skin. Ten shoe uppers with leather uppers are made of nylon cloth and leather. This kind of upper has better ventilation effect, and the new shoes will become bigger after passing through. However, because of the large number of stitched parts of the shoe upper, it is easy to open the line. It is recommended that such products be used for camping activities or for summer travel. The upper of the patchwork leather is spliced ​​by several pieces of leather. It has better durability than the leather upper, and has poor air permeability. It also has the problem of opening lines, so it is also suitable for regular camping activities. The full leather upper is the top product of the hiking shoes. It is made up of one piece to two pieces of leather, and has few sewing parts. It is suitable for all kinds of complicated road conditions, and its waterproofness, durability and warmth are very good. So for more use in more difficult sports and cold seasons. In order to solve the waterproof problem of hiking shoes, many manufacturers have introduced waterproof breathable hiking shoes. Its main principle is to add a layer of waterproof and breathable material on the inner side of the upper, and even if the water passes through the upper, it will not wet the feet.

Let's say that the waist of the shoes, the usual hiking shoes are high in the waist, it can protect the ankle effectively in the event of accidents, and can be fixed in the shoe position in the downhill, to avoid excessive squeeze the toes. Of course, excessively high waist can cause inconvenience during walking. Therefore, some hiking shoes also have lower back waists, which will improve.

Classification and characteristics of hiking shoes

Lightweight hiking shoes

Uses: Designed mainly for short-distance trekkers. It is an outdoor camping trip. It is not complicated for mountaineering and stays for a day or two.

Features: The design features of this type of shoes are relatively comfortable, soft and breathable. However, the hardness and wear resistance of soles are the lowest among hiking shoes.

Appearance: The upper of this type of shoe is called the stitching of sheepskin and chemical fiber synthetic materials. The sole is made of plastic material. The liner of the shoe is made of chemical fiber material with certain permeability, and the upper is lower.

Medium hiking shoes

Uses: Mainly designed for middle-distance trekkers, suitable for carrying more hiking equipment, the type of mountain is not very complicated, and the distance is usually short-to-medium distance climbers.

Features: The sole has good rigidity and wear resistance.

Appearance: The upper of this type of shoes is made of sheepskin or thin leather. The sole is made of hard plastic material or Vibram shoes are lined with softer sheepskin or Gore-Tex, SympaTex and other materials. The upper is medium in height and can effectively protect the feet and feet. joint.

Heavy hiking shoes

Uses: Mainly designed for long-distance trekkers, suitable for carrying heavier mountaineering equipment, and the types of mountainous lands they land on are relatively complex, and stay for longer time climbers.

Features: The sole has a strong hard and durable abrasion, can better protect the sole. Some models can also be fitted with ice grips.

Appearance: The upper of this type of shoes is made of thick leather. It has good softness and safety. Vibram is used on the sole and a certain amount of carbon fiber or steel plate is added. Gore-tex, SympaTex, Cambrelle and other materials are used to line the shoes. The upper is higher than the medium upper, which can effectively protect the lower leg joints.

Snow Mountain Hiking Shoes

This type of shoes is designed specifically for climbing snow-capped mountains above 6,000 meters above sea level. The uppers of the soles are all strong and rigid, which can effectively protect the safety of the legs and feet. They can be loaded with ice.

Features: The shoes are heavier in weight and less soft.

Appearance: Vibram and inner lining steel plate are used on the shoe sole, and hard plastic resin material is used on the upper. The shoes are lined with Gore-tex material and the upper is higher.

Press Material
1, plastic plate PP, PE and other materials based;
2, ceramic household ceramic-based plates;
3, the metal plates of stainless steel, aluminum, tin, tin and the like;
4, wood plates used mainly Dafan plate.

Stainless Steel Plate

Plastic Food Trays,Ottoman Serving Tray,Large Serving Tray

ChuangHengDa Stainless Steel Company , http://www.chaozhoustainlesssteel.com