It is understood that in the current furniture market, panel furniture has become a major category in the furniture category because of its novel style, bright colors and clear wood grain. Coupled with the relatively moderate price of products, consumers are increasingly favored. Experts suggest that when consumers buy wooden furniture, understanding and mastering the technical requirements of panel furniture and distinguishing their advantages and disadvantages is an effective way to correctly purchase panel furniture.楷模家具http://km.cnjiaju.com/share 1, pay attention to surface quality The wood-based panel furniture in panel furniture is based on wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer and paper grain. The wood-like pattern is clear and natural, smooth and flat. , has a good visual effect and feel. When purchasing furniture, it mainly depends on whether the surface of the furniture material has scratches, indentations, bubbling, degumming and peeling marks. 2, pay attention to production quality In the production of panel furniture, the formed panels are assembled by cutting, decorative edge sealing and component assembly. Look at the quality of the production of wood-based panel furniture mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration and the quality of the plate port. In the cutting saw, the plate has quality requirements for the flatness, verticality and angle of the plate parts. Generally speaking, the cutting technology of the plate can achieve the accuracy requirement within the range of 0.01 mm per meter. Well, there will be no tilting of the plates after the furniture is made. The side and surface decoration mainly depends on whether the rubber coating on the decorative part is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, whether the end face of the visible part such as the side plate, the door panel and the drawer panel of the component is sealed, and the decoration is finished. There is no trace of adhesion on the edge of the fine board. Assembling the assembly mainly depends on whether the hole at the hole is exquisite and tidy. Whether the connector is firm after installation, whether there is a gap between the plane and the end face, and there is no looseness in the hand. Whether the gap between the door and the drawer is too large, the general requirement is to be between 1.5mm and 2.0mm, and whether the opening and pulling of the door and the drawer are flexible and free. 3. Pay attention to the quality of metal parts and plastic parts In the panel furniture, metal parts and plastic parts are often used as fastening connectors, so the quality of the metal parts also determines the quality of the inner quality of the panel furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. Plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. The open connection requires flexible rotation, and the spring inside is tightly fitted so that the furniture will be smooth, easy and free of friction when it is opened. 4, pay attention to the main size Panel furniture is currently mainly based on complete sets of bedroom furniture and office furniture. In addition, there are also multi-functional film and television electrical cabinets and other products. National standards for the main dimensions (ie functional dimensions) of furniture are subject to regulatory requirements. For example, the depth of the space in the hanging wardrobe should be greater than or equal to 530mm, the distance between the upper edge of the hanging coat and the upper surface of the hanging coat should be greater than or equal to 1400mm, and the height of the table furniture should be 680mm to 760mm, where the middle drawer of the writing desk The middle clearance height from the lower edge to the ground height shall be greater than or equal to 580mm, and the clearance height between the bookcase layers shall be greater than or equal to 230mm to 310mm. The main dimensions mentioned above mainly refer to the understanding of the furniture purchase, because if the furniture is smaller than the specified size, it will bring a lot of inconvenience when used, affecting the use of furniture. If the depth of the large wardrobe space is too small, it will affect the hanging clothes, causing the door to close. In recent years, fabric furniture is like an irresistible whirlwind, blowing through the large and small furniture malls. It has captured the hearts of many consumers with its soft touch and colorful style. At present, fabric furniture is mainly composed of fabric sofas and fabric beds. Style features: fabric furniture with light and elegant shape, bright colors, harmonious colors, beautiful and varied patterns, soft texture brings a bright and lively atmosphere to the living room, more in line with people's advocating nature, the pursuit of leisure, relaxation, warmth Psychological and heavy taste. At the same time, fabric furniture also has the characteristics of being able to clean or change the cloth cover. You can change the cloth cover of different colors according to your own mood at any time. Buying tips: For fabric furniture, it is difficult to see the problem under the fabric surface. Sometimes even if there is a problem, the furniture looks good. So choosing fabric furniture takes time and a certain method. First, the frame should be an ultra-stable structure, dry hardwood, and should not have protrusions, but there should be piping at the edges to highlight the shape of the furniture. Secondly, the main joint should have a reinforcement device, which is connected to the frame by glue and screws. Whether it is plugging, bonding, bolting or pinning, it is necessary to ensure the firmness of each joint to ensure the life. The independent spring should be tightened with twine, and the level of work should reach eight grades. There should be a steel bar reinforcement spring at the load-bearing spring. The fabric of the fixed spring should not be corroded and tasteless, and the fabric covering the spring should have the same characteristics. The fire-retardant polyester fiber layer should be placed under the seat, the core of the cushion should be high-quality polyurethane, and the polyester fabric should be covered with a polyester fabric behind the furniture. For safety and comfort, the backrest must also have the same seat requirements. Finally, the foam is filled with cotton or polyester to ensure comfort. Pet Toys,Pet Chew Toy,Custom Pet Dog Toy,Pet Dog Chew Toy Yangzhou Pet's Products CO.,LTD , https://www.yzpets.cn
Consumers who choose panel furniture should choose the right one