Women Canvas Bags,Oxford Sports Rucksack,Business Briefcase,Custom Briefcase Longzhao Technology (Guangdong) Company Limited , https://www.gdprincebag.com
Generally speaking, when you want to make a wardrobe when you decorate, there are several kinds of plates. The king plate is shared for everyone: make the wardrobe plate
Plywood
A plywood is a plate-like material formed by gluing a veneer or a veneer formed by spin-cutting a piece of wood. Commonly there are three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood, plywood, nine plywood, twelve plywood). Plywood has common defects such as low bonding strength and partial opening, plywood warping.
2. MDF
MDF, there are several, there are many thicknesses, if the wardrobe is generally 1, 2 or 1.5, but the board of the wardrobe is generally called his composite board, there is a single side, two-sided distinction, there is a pattern How much to make with a composite board will make you see some nail holes, not beautiful. MDF oilers are the most convenient, and the construction is between the two.
Wood board can be spliced, nailed, screwed, and the most convenient for construction, but surface treatment is the most troublesome of these. The moisture-proof board is a particle board. Nowadays, it is often seen on the market, it is not covered with paint, and the cost is low. It is often used to make cabinets.
3. Large core board
The cabinet core is made of 12% large core board, which is made of fireproof board or waterproof wood grain paper. The appearance of the 3 cm color panel (there are: Sapele / Blackberry / Red Tan / Elm, etc.) depends on your own personal preference.
There is also a large core board to be attached to the panel, the panel will definitely be painted, the cost and the composite board are completely divided. Of course, in terms of hardness, the quality will definitely be much better. It is better to use the large core board for the wardrobe. The strength of the same level of the finger joint board is not high, but the span of the wardrobe is relatively large, and the required strength is relatively high. If you want to use the direct board, the strength is higher. Sealing the panel, then the cost will increase accordingly.
4. Painted sheet
The base of the baking varnish is a MDF, and the surface is baked at a high temperature by six spray-baked imported lacquers (three bottoms, two sides, one light). The 'painting' currently used for wardrobes only illustrates a process in which the paint is treated with a paint-treated substrate door panel that is heated and dried in a drying oven. The paint board is characterized by bright color and easy shape, strong visual impact, very beautiful and fashionable, excellent waterproof performance, strong anti-pollution ability and easy to clean. The disadvantage is that the process level is high and the rejection rate is high, so the price is high; the use should be carefully taken care of, fear of bumps and scratches, it will be difficult to repair once the damage occurs, and the whole should be replaced; the kitchen with more soot is prone to appear. Color difference.
The quality of the king, the king of the plate, do not forget the initial heart, adhere to the crown quality. King's plate advocates people to pay attention to their living environment, and to present the most sought-after and tasteful group of people with the highest quality products, to present the most beautiful and exquisite time, and to taste the rare happiness. Prestige life begins with the king's ecological plate.
King plate, China's top ten eco-brands, trustworthy, after-sales protection, welcome to inquire. Hotline
King decoration plate for home decoration, crown quality, trustworthy!
The wardrobe is composed of cabinet, door panel and hardware. What kind of board is used to make the wardrobe?