How to prevent traps in custom furniture

How to prevent traps in custom furniture

【Abstract】 (1) First of all, you need to visit the factory. Whether you are buying custom furniture in a well-known shopping mall, you must also look at the brand's factory buildings and business licenses. At present, many brands do not have factories, many It is commissioned by some underground processing plants for production. If you ask to see the factory, everything will be revealed. Looking at the business license is mainly to understand the length of time the company is engaged in the custom furniture industry, because the longer the custom furniture industry is engaged, the more experience it has, the more detailed the service, because you are buying an invisible product. Once you have a problem, it’s too late. Yimeiju Furniture http://

(2) Environmental protection of furniture Many manufacturers will provide a test report for the board. Generally, the above data is more impressive and will be far below the national standard. Don't be fooled by this data. The most important thing is that he promises you. That is the beautiful data, or the unified national standard. Another neglected problem is the environmental protection of the edge-sealing glue used in the processing. At present, the best quality and the most environmentally friendly is the German Niutou brand edge-sealing adhesive. In the custom furniture industry, there are very few Manufacturers will use (because the price is too expensive). There is also the environmental protection of the edge banding. Most of the edge bandings are made of plastic products. It is well known that they are also plastic products. The environmental protection will be far apart and the price will be far apart.
(3) The temptation of hardware usually introduces the quality of the rails and door hinges. Of course, the quality of these two items is very important, but what many consumers ignore is: whether a cabinet is durable or not, it is made up of countless small connectors. As determined, the number of small connectors is many, the price difference is several times or even ten times different, so it also has a greater impact on the cost of furniture. Consumers should not only pay attention to large hardware, but also hardware can not be ignored, they will all directly Affect the life of your entire cabinet.

(iv) Whether the furniture panels are properly applied or not. In order to reduce the cost, the plates used are all uniform, either all of them use oriented strand board or all medium density fiberboard. In fact, both boards have their weaknesses and advantages. Therefore, they should be made in different parts of the furniture, such as MDF, because they are of the same density and are not easy to be deformed, so they are suitable for door panels, but not suitable for three-piece connection, so it is not suitable for cabinets; oriented strand board is because of both sides The loose structure in the middle has a grip on the connection of the three-piece sleeve, which is suitable for the cabinet body, but because of the looseness in the middle, it is not suitable for the door panel because of the easy deformation. Because good custom furniture should be made using the different characteristics of the board.
(5) Structure of custom-made furniture Many companies that customize wall cabinet doors are said to be able to make furniture. In fact, furniture has a fundamental difference from cabinet doors. First, the home is detachable and consists of several cabinets. However, the cloakroom is composed of a virtual cabinet and cannot be reused. Secondly, the furniture needs to be designed by the most professional designers, and the closet cloakroom only needs to fill the space, which can be done by an ordinary draftsman.
(6) Free design confusion The formal furniture designer in our country (called a home designer abroad, because he not only has to design furniture but also design the surrounding environment), is very scarce, not to mention in the furniture order industry, The mass furniture industry is in short supply, so the talents are very expensive. Therefore, the so-called free design is just a service that cannot be regarded as a design. Because this kind of free is worthless, in fact, the furniture design is quite popular, just like Guangdong. People are like fried rice noodles, everyone will speculate, but everyone who loves to eat, not everyone can do it. So if there is no good home designer to serve you, then it is recommended that you buy ready-made furniture, at least it has been designed by professional home designers, although it may not be suitable for your home, but than those fake custom furniture designers. It’s much better.
(7) The processing equipment of furniture must understand
1) The cutting process is to use the cutting center or the ordinary cutting machine. The former is the plate is pressed by the air pump, and the cutting plate is advanced to cut the plate, which reduces the error of human factors. Usually the error of this device is 0. 01mm. Within, the quality of panel furniture is the precision, so that the hardware can be evenly stressed, thus extending the life of the furniture, but the equipment is expensive and covers a large area. Only a few enterprises in the custom furniture industry are using it. (Example: Haijia). The latter is operated by human hands, so the lower precision is greatly affected by human factors, which will cause uneven force on the hardware, thus affecting the life of the furniture.
2) Edge sealing process There are three ways to customize the furniture edge banding, manual, semi-automatic and fully automatic. The use of liquid universal adhesive for manual edge sealing is poor in environmental protection and easy to peel off. It is greatly affected by human factors. Semi-automatic use of solid low-temperature adhesive has improved environmental protection, but the pressure is only supported by human abdominal muscles, so the reliability is poor. It is easy to peel off; automatic edge banding machine (usually imported machine) uses imported solid high temperature glue, which is more environmentally friendly, and the pressure is provided by gas pump, so the quality is quite stable.
3) Excavation process The row of holes in the furniture can be used for bench drills, single row drills and multiple rows of drills. The furniture is made up of countless connectors, so many holes are required on the plates, and the accuracy of the holes directly affects The force of the hardware and the service life of the furniture. Usually, the underground processing plant uses bench drills, and the accuracy of the bench drill is low; the precision of the single row drill is higher, but since it is only a hole in one direction, there is an error in the process of turning the plate; At the same time, the hole is arranged in multiple directions, the human factor is almost reduced to zero, but the bench drill can be purchased only for a few hundred yuan, and the multi-row drill can be purchased for more than ten or two hundred thousand.
(8) Does the cabinet have size and color restrictions? If the size of the furniture that the merchant gives you is mostly an integer size, only the part is non-standard size, then you should pay attention to it. You only buy the system furniture, but not the flower. The money for custom furniture! The real custom furniture should be that each cabinet can be non-standard size, and the colors can be combined arbitrarily, but the cost is at least 20% higher than the system furniture.

Child Toothbrush

Children's Toothbrush

Our company produces a variety of children's toothbrush, about 20 different cartoon shape handles, suitable for children of different ages.

The main function is to clean and protect the children's teeth, the characteristic is to brush the head is small, the modelling cartoon. Brush handle USES environmental protection grade material, can contact food and mouth directly, without any harmful material release, more healthy and safe. The bristles of a child's toothbrush are both soft and super soft, which makes it easier to remove things from the teeth. Use a child's toothbrush: master the time and frequency of brushing, use toothpaste in moderation, and avoid swallowing, brushing, and toothpaste.

Child Toothbrush,Kid'S Toothbrush,Kid Personal Care Toothbrush,Dental Kit Child

Yangzhou Special Care Daily Products Co., Ltd , https://www.justspecialcare.com