Causes and solutions of wrinkles in laminating machine

Causes and solutions of wrinkles in laminating machine

Wrinkle phenomenon of laminating film, in fact, this kind of problem is widespread, and because of this, the problem of wrinkling of laminating film of laminating machine has also been a problem that has been discussed in the post-press processing industry. The solution to the film wrinkle, the pre-coating film laminating machine is much simpler in operation than the previous instant film laminating machine. The function of anti-rolling laminating machine is to solve the problem of curling and curling of hot laminating film.

That is, the causes and solutions of wrinkles on the coating film laminator are as follows.

1. Vertical wrinkles. The tensile force of the film is too large, the pressure is not flattened, and there are creases in itself, so it wrinkles after covering the film.

Solution: Relax the tension of the film, adjust the stretching roller, and then flatten the film before pressing.

2. Wrinkled diagonally. The film has a large pulling force and improper adjustment of the roller position, which causes the film itself to be inconsistent in tension and uneven in film transfer, and is regularly folded toward the loose side.

Solution: Relax the tension of the film, adjust the stretch roller or temporarily change the film.

3. Horizontal wrinkles. The temperature of the heating roller is too high, and the pressure of the rubber roller is too large. During the lamination, the film is scalded in the horizontal direction into a horizontal wrinkle.

Solution: appropriately reduce the temperature of the roller or reduce the pressure of the rubber roller.

4. The temperature is too high when heating, the film is deformed and wrinkled.

Solution: lower the temperature.

5. The water content in the paper is too large, the paper shrinks after the film is dried, and the film deforms and wrinkles.

Solution "The moisture content of the paper should be about 5% to keep the temperature and humidity in the working room normal.

6. The conduction roller of the laminating machine is not running well or there are dirt on the surface, which prevents the film from stretching and running normally.

Solution: Conductor roller bearings should be lubricated on time and kept clean and free of foreign objects.

7. The gap between the guide rollers is too small, squeeze the film into a wrinkle before pressing.

Solution: Correctly adjust the gap between the guide rollers.

8. The temperature of the roller is too high, and the film expands when heated.

Solution: Reduce the roller temperature.

9. The film conducting rollers are not parallel, causing the film to run unbalanced.

Solution: Correctly adjust the conduction roller to be parallel.

10. The ends of the film are inconsistent or have wavy edges.

Solution: replace qualified film.

11. The adhesive layer is too thick, the viscosity is too large, and the paper and film slide after being pressed and pressed.

Solution: adjust the amount of glue and increase the drying temperature.

The coating principle of the pre-coating film laminating machine is the same as that of the instant coating film laminating machine, that is, the coating process and process are more simplified, and the adhesive is not required to heat and dry. I believe that it is more convenient for everyone to use when laminating.

Acrylic Poker Chips

 

Our Acrylic Poker Chip are used on every gaming table in every casino across the world. Acrylic Custom Poker Chips are an appealing choice for both business and home games. Customize your Poker Chips. Custom Labels or Custom inlay, and Direct Print Acrylic Poker Chips. Personalize your poker games with custom poker chips. 


Host a poker party with your own set of unique poker chips. Custom acrylic poker chips can be used for brand advertisement and promotions, too. Place your business logo on acrylic poker chips and let it serve as your unique business card!  Inquiry us for wholesale professional casino poker chips.

Acrylic Poker Chips

Casino Acrylic Poker Chips,Acrylic Colorful Heavy Poker Chips,Acrylic Plastic Round Chips Casino,Acrylic Gaming Poker Chips

New Bolly Display , https://www.newbolly-display.com